The World's Smallest Dual Output LNBF

The GEOSATpro SL2 Bullet LNBF is the smallest two output Ku-band LNBF available in the world! GEOSATpro technicians incorporated the latest in microelectronic technology to design and produce this innovative high performance twin LNBF. Independent isolated outputs prevent interference between multiple receivers. The small bullet size housing will not compromise signal reception. You will not find a higher performance FSS LNBF anywhere.

• Replaces a single output LNBF for installation support of 2 or more receivers
• Watch different channels from the same satellite dish on 2 different receivers
• Compatible with DVBS, FTA, MPEG, DCII and Analog satellite receivers
• Stable frequency and low noise 0.4 NR for the very best reception in fringe signal areas
• Twin F-type coax outputs for direct connection with 1 or 2 satellite boxes
• Connect to a standard 3x4 multi-switch, 22KHz or DiSEqC type multi-switch for multiple receiver connections (3 or more receivers)
• 40mm standard size FSS satellite dish LNBF mount
• Allows 3 - 4 degree reception of multiple satellite dishes
• Perfect for adding additional rooms for a Glorystar System

RF Input
I/P Frequency Range	11.7 ~ 12.75GHz
IF Input
L.O. Frequency	10.75GHz
O/P Frequency	950 ~ 2000MHz
L.O. Stability	+/-3MHz (-40°C ~ +60°C)
L.O. Phase Noise	<-50 dBc @ 1KHz offset <-80 dBc @ 10KHz offset <-95 dBc @ 100KHz offset
Output	75 ohms F-female type connector
Conversion Performance @ 25°C
Noise Figure	0.4dB (Typ)
Cross Polarization	25dB (Typ)
Image Rejection	40dB (Min)
Output VSWR	2.0:1
Conversion Gain	60dB (Typ)
Gain Flatness	+/-0.5dB / 26 MHz, 8dB over each IF band
Output Spurious	<-60dBm
Power Requirements
Current Consumption	170mA (200 mA Max)
Operating Voltage	Vertical: 10.5 – 14.0 VDC Horizontal: 16.0 – 20.0 VDC
Environmental
Working temp/humidity	-30°C ~ +60°C  0 ~100%
Mount Diameter	40mm
Length	5 inches  (12.5mm)
Weight	4.1 ounces  (116.2 grams)

GEOSATpro has partnered with reknown switch manufacturer Ecoda to produce reliable multi-switches for all other switches to be measured against.

This switch does not require a power supply and operates from the LNB power supplied by the satellite receiver.

---

Installation Examples:

Two Receivers Connected to Receive a Single Satellite

1 Dual Output LNBF

---

Three or Four Receivers Connected to Receive a Single Satellite

1 Dual Output LNBF and a 3x4 Multi-Switch

---

Three or Four Receivers Connected to Receive Two Satellites

2 Dual Output LNBFs and a 22KHz 4x4 Multi-Switch